Thermal Potting
Shenzhen Tensan is a professional manufactures of Thermal Grease. There may be a lot of Thermal Grease manufacturers out there, but not all Thermal Grease manufacturers are alike.Our professional expertise in manufacturing Thermal Grease has been honed over the past 10+ years.
Thermal potting is suitable for general potting material for power supplies, connectors, sensors, industrial controls and transformers.
Termal potting Two-part, 1 to 1 mix, dark gray, general purpose encapsulant with good flowability and flame resistance.> Excellent Heat Resistance Silicone Encapsulant Waterproof> Heat Conductive Potting Silicone> Silicone Potting for LED Driver
Read More Thermal Grease
Shenzhen Tensan is a professional manufactures of Thermal Grease. There may be a lot of Thermal Grease manufacturers out there, but not all Thermal Grease manufacturers are alike.Our professional expertise in manufacturing Thermal Grease has been honed over the past 10+ years.
Thermal grease is suitable for use as an interface material for a variety of mid to high end PCB system assemblies. Tensan thermally paste are grease like silicone materials, heavily filled with heat-conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. The compounds are designed to maintain a positive heat sink seal to improve heat transfer from the electrical device or PCB system assembly to the heat sink or chassis, thereby increasing the overall efficiency of the device.
> Silicone-based Thermal Paste with Good Insulation for Consumer Electronics> Excellent Heat Conductivity Thermal Paste Compound for Laptop CPU> Thermal Paste Heat Transfer for LED Bulb
Read More Thermal Pad
By using a special process, Tensan thermal pad use the silicone as the base material, adding thermal conductive powder and flame retardant together to make the mixture to become thermal interface material. Tensan thermal pad is effective in lower the thermal resistance between the heat source and the heat sink.
> Soft Silicone Type Thermal Mat/Thermal Pad for Electronics TS300
Read More Electronic Silicone
High performance neutral cure electronic silicone adhesive/sealant,One-part adhesive/sealant • Cures at room temperature when exposed to moisture in the air • Alkoxy cure system • Non-sag, paste consistency • Easy to apply • Cures to a tough, flexible rubber • Excellent adhesion to many substrates.
> Black RTV Silicone Sealant> Widely Used RTV Adhesive
Read More
About Us
Shenzhen Tensan Co., Ltd. was established in July 2014 in Shenzhen Special Economic Zone. 0ur company, as one of the high-tech company, is professional engaged in organic silicone and sizing program R&D, manufacturing, sales and service. The company’s main products are thermal potting, thermal grease, thermal pad, electronic silicone and sizing program. Our products are mainly applied in electronic appliances industry, home appliances industry, lighting industry, automobiles industry, photovoltaic industry, mobile phone industry. Owing to The Belt and Road strategy, our company vigorously implement opening strategy to expand the Belt and Road. Branches and office have been opened in Thailand, Vietnam, India, the Philippines. Service localizing to improve company service efficiency. Our company firmly adhere to the profession creates value to provide excellent services for domestic and foreign customers with all-round silicone use and solutions.
Latest News
12/12/2024Tensan Red Glue vs. Other Red Glues Comparison Report
Read MoreThis report centers on the comparison between Tensan Red Glue and other red glues. Tensan Red Glue shows superiority in performance. It has excellent viscosity, rapid curing with good heat and chemical resistance, precise glue dot control, favorable cleaning property and high reliability. In contrast, other glues have drawbacks like unstable viscosity and weak resistance in harsh conditions. Regarding cost-effectiveness, Tensan Red Glue boosts production efficiency and cuts waste. In application, it suits consumer electronics, automotive electronics and industrial control where high performance and reliability are essential, while others are restricted in such fields. Enterprises should consider multiple factors for glue selection.
11/12/2024Comparison and Analysis of Tensan Silicone Potting and Other Silicone Potting
Read MoreThis article deeply compares Tensan silicone potting with other common silicone potting. In terms of basic properties, Tensan silicone potting has a moderate and stable viscosity, a relatively fast and balanced curing time. In environmental resistance properties, it can resist heat up to 200°C, cold down to -45°C, and also has good moisture and chemical corrosion resistance. In electrical properties, it shows excellent insulation and a stable and suitable dielectric constant. It has good adhesion to substrates and long-term stability. In environmental protection and safety, it complies with environmental protection standards, has a low VOC content and a mild curing process. Overall, Tensan silicone potting has significant advantages in many aspects and is an excellent choice for many application scenarios.
10/12/2024Tensan Thermal Pads - The Outstanding Choice Standing Out in Electronic Heat Dissipation Field
Read MoreThis introduction focuses on the comparison between Tensan Thermal Pads and other thermal pads. Taking the TS300 model of Tensan Thermal Pad as an example, it has a thermal conductivity of 3.0 W/m-k, high adhesion material characteristics, excellent stability, and is suitable for various electronic devices with obvious cost-effectiveness advantages. In contrast, other thermal pads have different performances in terms of thermal conductivity, materials, application scenarios, and prices, aiming to clearly present the product characteristics for relevant practitioners and consumers and help with product selection decisions.